标准编号：ISO 13000-1:2005
中文名称：塑料 聚四氟乙烯（PTFE）半精加工产品 第1部分：要求和牌号
英文名称：Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 1: Requirements and designation
发布日期：2005-11
标准范围
This part of ISO 13000 specifies the requirements for processed unfilled polytetrafluoroethylene (PTFE) products, which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 12086-1 and, as provided in ISO 12086-1, may contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted. This part of ISO 13000 allows for four grades based on tensile strength and elongation at break. The semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also have specified electrical properties or other properties when they are required for an application.NOTE References to other standard specifications for semi-finished products made from polytetrafluoroethylene are listed in Annex A for information.
立即下载标准文件