ISO 8132:2006 液压传动 160巴（16MPa）和250巴（25MPa）系列的单杆液压缸 辅助设备安装尺寸

标准编号：ISO 8132:2006

中文名称：液压传动 160巴（16MPa）和250巴（25MPa）系列的单杆液压缸 辅助设备安装尺寸

英文名称：Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series — Mounting dimensions for accessories

发布日期：2006-01

标准范围

This International Standard lays down the mounting dimensions required for the interchangeability ofaccessories for the 16 MPa [160 bar1)] medium series cylinders in accordance with ISO 6020-1 and for the25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been designedspecifically for use with cylinders manufactured in accordance with ISO 6020-1 and ISO 6022, but this doesnot limit their application.This International Standard covers the following accessories, identified in accordance with ISO 6099:- AP2 — rod clevis, female thread (see Figure 1 and Table 1);- AF3 — rod flange, circular (see Figure 2 and Table 2);- AB4 — clevis bracket, straight (see Figure 3 and Table 3);- AB3 — clevis bracket, in angle (see Figure 4 and Table 4);- AT4 — trunnion bracket (see Figure 5 and Table 5);- AA8 — pivot pin, plain or spherical bearing (cotter pin or snap ring type) (see Figure 6 and Table 6);- AP6 — rod eye spherical, female thread (see Figure 7 and Table 7);- AP4 — rod eye plain, female thread (see Figure 8 and Table 8).These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The designof these accessories is based on the maximum forces resulting from the specified internal diameters of thecylinders and pressures according to ISO 3320 and ISO 3322.This International Standard applies only to the dimensional criteria of products manufactured in conformitywith this International Standard; it does not apply to their functional characteristics.

标准预览图