标准编号：ISO 16010:2019
中文名称：人造弹性密封件 运输气体燃料和碳氢化合物流体的管和配件所用密封件的材料要求
英文名称：Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
发布日期：2019-08
标准范围
This document specifies requirements for elastomeric materials used in seals for supply pipes and
fittings, ancillaries and valves at operating temperatures in general from –5 °C up to 50 °C and in specia
cases from –15 °C up to 50 °C, for the following:
a) general applications (see Table 4, type G series):
— gaseous fuel [manufactured, natural and liquefied petroleum gas (LPG) in the gaseous phase],
— hydrocarbon fluids with an aromatic content up to 30 % (by volume), including LPG in th
liquid phase;
b) special applications (see Table 4, type H):
— materials suitable for carrying gaseous fuels containing gas condensates and hydrocarbon
fluids of unrestricted aromatic content.
General requirements for finished joint seals are also given; any additional requirements called for b
the particular application are specified in the relevant product standards, taking into account that th
performance of pipe joints is a function of the seal material properties, seal geometry and pipe join
design. This document is used where appropriate with product standards which specify performanc
requirements for joints.
This document is applicable to joint seals for all pipeline materials, including iron, steel, copper and
plastics.
In the case of composite sealing rings, the requirements in 5.2.8 and 5.2.9 apply only when the material
used for any elastomeric parts come into contact with gaseous fuel or hydrocarbon fluid.
Elongation at break, tensile strength, compression set and stress relaxation requirements for material
of hardness classes 80 and 90 apply only when they constitute that part of the seal which participate
directly in the sealing function or contributes directly to long-term stability.
This document is not applicable to the following:
— seals made from cellular materials;
— seals with enclosed voids as part of their design;
— seals required to be resistant to flame or to thermal stress;
— seals which contain splices joining pre-vulcanized profile ends.
立即下载标准文件