ISO 11003-2:2019 粘合剂 结构胶粘剂抗剪性能的测定 第2部分：厚粘附体抗拉试验方法

标准编号：ISO 11003-2:2019

中文名称：粘合剂 结构胶粘剂抗剪性能的测定 第2部分：厚粘附体抗拉试验方法

英文名称：Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends

发布日期：2019-06

标准范围

This document specifies a test method for determining the shear behaviour of an adhesive in a single 
lap joint bonded assembly when subjected to a tensile force.
The test is performed on specimens consisting of thick, rigid adherends, with a short length of overlap, 
in order to obtain the most uniform distribution of shear stresses possible and to minimize other stress 
states which initiate failure.
This test method may be used to determine:
— the shear-stress against shear-strain curve to failure of the adhesive;
— the shear modulus of the adhesive;
— other adhesive properties that can be derived from the stress/strain curve such as secant shear 
modulus and maximum shear stress;
— the effect of temperature, environment, test speed, etc., on these properties.
This document does not apply in case of adhesion failure.

标准预览图