标准编号：ISO/TR 12998:2019
中文名称：机械连接 接头疲劳试验指南
英文名称：Mechanical joining — Guidelines for fatigue testing of joints
发布日期：2019-04
标准范围
This document gives recommendations for test specimens and procedures for performing constant
load amplitude fatigue tests on single- and multi-joint sheet specimens in the thickness range from
0,5 mm to 6 mm at room temperature and a relative humidity of max. 80 %.
NOTE The thickness range for advanced high strength steels (AHSS) and ultra high strength steels (UHSS)
is generally below 3,0 mm. Greater thicknesses apply for aluminium alloys, for example.
This document covers:
— testing of joints to evaluate materials;
— evaluation of the influence of joint type and joint size on the test results;
— evaluation of the influence of load type and load mode on the test results;
— testing of component-like specimens to evaluate their structural performance.
Depending on the specimen used, it is possible from the results to evaluate the fatigue behaviour of
joints under shear-, peel-, normal-tension and combinations of loads and that of the tested specimen.
The results of fatigue testing obtained with component like specimens are suitable for deriving criteria
for the selection of materials and thickness combinations for structures and components subjected to
cyclic loading. This statement is especially relevant for results obtained with specimens with boundary
conditions, i.e. a local stiffness, similar to that of the structure in question. The results of fatigue testing
are suitable for direct application to a design only when the loading conditions in service and the
stiffness of the design in the joint area are similar.
This document does not apply to civil engineering applications such as metal building and steel
construction which are covered by other applicable standards.
立即下载标准文件