ISO 4586-3:2015 装饰用高压层压制件（HPL HPDL） 热固性树脂板（通常被称为层压制品） 第3部分：用于成键支持 分层厚度小于2mm 基板的分类和规范 　　　　

标准编号：ISO 4586-3:2015

中文名称：装饰用高压层压制件（HPL HPDL） 热固性树脂板（通常被称为层压制品） 第3部分：用于成键支持 分层厚度小于2mm 基板的分类和规范 　　　　

英文名称：High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and inte

发布日期：2015-11

标准范围

This part of ISO 4586 applies to laminates less than 2 mm thick normally intended for bonding tosupporting substrates to produce HPL composite panels and establishes a classification system forhigh-pressure decorative laminates according to their performance and main recommended fieldsof application, including materials with special characteristics, for example formability or definedreaction to fire. This part of ISO 4586 also specifies requirements for the properties of the varioustypes of laminates covered by this classification system.High-pressure decorative laminates are characterized by their qualities, durability and functionalperformance. HPL sheets are available in a wide variety of colours, patterns and surface finishes; theyare resistant to wear, scratching, impact, moisture, heat and staining; and possess good hygienic andanti-static properties, being easy to clean and maintain.ISO 4586-2 specifies the methods of test relevant to this part of ISO 4586. ISO 4586-4 throughISO 4586-8 are reserved for special types of HPL materials.In an effort to harmonize ISO 4586 with other High-Pressure Decorative Laminate standards, multiplemethods may be published that demonstrate similar properties. In these instances, the same testmethod title is given and is annotated as either “Method A” or “Method B”. This is the case in thefollowing tests: Edge Squareness - 8/9, Dry Heat – 17/18 Dimensional Stability at Elevated Temperatures- 19/20, Dimensional Stability at Ambient Temperature - 21/22, Staining - 30/31, Lightfastness - 32/33,Cigarette Burns - 36/37, Formability - 38/39, and Blistering - 40/41. In these instances, either methodmay be utilized in testing. Compliance to both methods is not required. While these tests are similarthey are by no means identical and results of one method do not necessarily correspond to the resultsof the accompanying test. In these situations, consult the documentation in specific clauses of ISO 4586for performance requirements. Each specific method has performance requirements particular to thatmethod for individual grades of high-pressure decorative laminate.

标准预览图