ISO/IEC 8484:2007 信息技术 存折的磁条

标准编号：ISO/IEC 8484:2007

中文名称：信息技术 存折的磁条

英文名称：Information technology — Magnetic stripes on savingsbooks

发布日期：2007-07

标准范围

This International Standard specifies the characteristics and location of a magnetic stripe on a savingsbook asdefined in Clause 4 and the use of such savingsbooks for international interchange. Compatibility withinternational interchange systems is provided through the requirements of this International Standard,enabling a savingsbook with a magnetic stripe to be read and possibly encoded in a device that is compatiblewith reading identification cards used in international interchange.This International Standard specifies requirements for a magnetic stripe (including any protective overlay) on asavingsbook, the encoding technique and coded character sets. It also specifies the characteristics of thesavingsbook cover such as stiffness, minimum size, surface irregularities, roughness and interaction betweenthe cover material and the magnetic stripe. It takes into consideration both human and machine aspects andstates minimum requirements.Coercivity influences many of the quantities specified in this International Standard but is not itself specified.Exposure of the savingsbook to a magnetic field is likely to destroy the recorded data.This International Standard defines performance criteria for savingsbooks. No consideration is given withinthis International Standard to the amount of use, if any, experienced by the savingsbook prior to test. Failureto conform to specified criteria should be negotiated between the involved parties.ISO/IEC 10373-2 specifies the test procedures used to check savingsbooks against the parameters specifiedin this International Standard. References in the test method to cards shall refer to savingsbooks.NOTE 1 Numeric values in the SI and/or Imperial measurement system in this International Standard may have beenrounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the twoshould not be intermixed or reconverted. The original design was made using the Imperial measurement system.NOTE 2 National systems may use different specifications, such as DIN, as well as proprietary specifications for closedsystems.

标准预览图