标准编号：ISO 6185-4:2011
中文名称：充气艇 第4部分：发动机额定功率为15kW及以上、船身长度在8-24m的艇
英文名称：Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
发布日期：2011-07
标准范围
This part of ISO 6185 specifies the minimum safety characteristics required for the design, materials,manufacture and testing of rigid inflatable boats (RIBs) with a hull length of between 8 m and 24 m and with amotor power rating of 15 kW and greater.This part of ISO 6185 is applicable to Type IX and Type X RIBs intended for use within the operatingtemperatures of ?20 °C to +60 °C.? Type IX: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboardsides, suitable for navigation in inshore and sheltered waters, up to and including wind force 6 Beaufortand significant wave heights up to 2 m (design categories C and D), with a hull length of between 8 m and24 m and with a motor power rating of 15 kW and greater.? Type X: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides,suitable for navigation in waters, up to wind force 8 Beaufort and significant wave heights up to 4 m(design category B), with a hull length of between 8 m and 24 m and with a motor power rating of 75 kWand greater.NOTE 1 General arrangements of typical boats of Types IX and X are given in Annexes A and B, respectively.NOTE 2 For boats with power ratings of 4,5 kW and less, refer to ISO 6185-1. For boats with power ratings of 4,5 kWto 15 kW inclusive, refer to ISO 6185-2. For boats with a hull length of less than 8 m and power rating of 15 kW andgreater, refer to ISO 6185-3.Boats outside these types or outside of Type IX and Type X, as defined, are outside of the scope of ISO 6185.NOTE 3 For inflatable boats with a hull length greater than 8 m, it is suggested to use the requirements of ISO 6185-3.
立即下载标准文件