标准编号：ISO/ASTM 51607:2013
中文名称：丙胺酸-EPR剂量测定系统使用规程
英文名称：Practice for use of the alanine-EPR dosimetry system
发布日期：2013-06
标准范围
1.1 This practice covers dosimeter materials, instrumentation, and procedures for using the alanine-EPR dosimetry system for measuring the absorbed dose in the photon and electron radiation processing of materials. The system is based on electron paramagnetic resonance (EPR) spectroscopy of free radicals derived from the amino acid alanine.21.2 The alanine dosimeter is classified as a type I dosimeter as it is affected by individual influence quantities in a welldefined way that can be expressed in terms of independent correction factors (see ASTM Practice E2628). The alanine dosimeter may be used in either a reference standard dosimetry system or in a routine dosimetry system.1.3 This document is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing, and describes a means of achieving compliance with the requirements of ASTM E2628 “Practicefor Dosimetry in Radiation Processing” for alanine dosimetry system. It should be read in conjunction with ASTM E2628. 1.4 This practice covers alanine-EPR dosimetry systems for dose measurements under the following conditions:1.4.1 The absorbed dose range is between 1 and 1.5 ×10(5)Gy.1.4.2 The absorbed dose rate is up to 10(2)Gy s(-1) for continuous radiation fields and up to 3×3 10(10)Gy s(-1) for pulsed radiation fields (1-4).(3)1.4.3 The radiation energy for photons and electrons is between 0.1 and 30 MeV (1, 2, 5-8).1.4.4 The irradiation temperature is between –78 °C and +70 °C (2, 9-12).1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
立即下载标准文件