标准编号：ISO 19281:2016
中文名称：航空货运 耐火集装箱 设计、性能和试验要求
英文名称：Air cargo — Fire resistant containers — Design, performance and testing requirements
发布日期：2016-02
标准范围
This International Standard specifies the minimum design and performance criteria and testingmethods of passive fire resistant containers (FRCs) for carriage on aircraft main deck, to be used oneither of the following:a) in those cargo compartments of civil transport aircraft where they constitute one means ofcomplying with applicable airworthiness regulations;b) on a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraftcargo compartments where airworthiness regulations do not currently mandate their use.The fire resistant containers (FRCs) specified by this International Standard are intended to be usedto contain and restrain unitized cargo for loading into either of the following aircraft main deck cargocompartments:a) Class B aircraft cargo compartments according to CS-25, CCAR-25, JAS Part 3 or 14CFR Part 2525.857 (b), in accordance a) or b) above;b) Class E aircraft cargo compartments according to CS-25, CCAR-25, JAS Part 3 or 14CFR Part 2525.857 (e), in accordance with b) above;c) Class F aircraft cargo compartments according to CS-25 § 25.857(f) and AMC to CS-25.855 and 25.857,or 14CFR Part 25 § 25.857(f) and FAA Advisory Circular AC25.857-X, in accordance with a) above.NOTE 1 Though nothing formally prevents a fire resistant container (FRC) from being carried in a lower deckClass C aircraft cargo compartment, it is not intended for this use since its fire containment capability wouldbe redundant with that of the aircraft’s fire detection and suppression system, which it could hamper. Consultcurrent regulatory guidance materials and aircraft type’s Weight and Balance Manual whenever available.Containers are specified in this International Standard only insofar as their flammability requirementsand fire resistance performance are concerned. They are not otherwise specified in this InternationalStandard, but still require meeting the applicable general standards.NOTE 2 See Clause 2 and 4.1 and 4.2 for applicable containers airworthiness approval and general designstandards.This International Standard does not cover requirements for fire detection or suppression devices.The specified fire resistant containers (FRCs) are passive devices capable of containing a fire for thespecified duration by themselves.NOTE 3 Nothing, however, prevents additional use of self-contained fire detection or suppression deviceswithin fire resistant containers (FRCs), but such devices are not specified herein (see 4.5.5).This International Standard does not cover requirements for other types of fire resistant containers notspecified therein.The use of fire resistant containers meeting the requirements of this International Standard is notalone sufficient to ensure flight safety: this International Standard is based on the assumption thatthe approved fire resistant containers will be built up, installed, and checked prior to aircraft loadingin accordance with appropriate operating instructions, by competent, suitably trained, personnel asdefined for example in ISO 9001:2008, 6.2.2 (see 9.3).
立即下载标准文件