标准编号：ISO 22915-10:2008
中文名称：工业车辆 稳定性的验证 第10部分：有动力装置侧移载荷堆垛的特殊条件下车辆驾驶的附加稳定性试验
英文名称：Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
发布日期：2008-06
标准范围
ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and theverification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled orpedestrian-propelled vehicles, excepting those running on rails. They are either operator-controlled ordriverless and designed to carry, tow, push, lift, stack or tier in racks.This part of ISO 22915 specifies an additional test for verifying the stability of a laden truck fitted with apowered load-handling device, such as a sideshift, which can displace the centre of gravity to a substantial,predetermined extent from the longitudinal centre plane of the truck. Such devices are used in that mode fordepositing and retrieving a load with the mast vertical or raised to maximum boom angle and extension.A displacement is considered to be a substantial displacement if it is more than-- 100 mm, for a truck with a rated capacity < 5 000 kg, 150 mm, for a truck with a rated capacity ≥ 5 000 kg and ≤ 10 000 kg,-- 250 mm, for a truck with a rated capacity > 10 000 kg and < 20 000 kg, 350 mm, for a truck with a rated capacity ≥ 20 000 kg.
立即下载标准文件