标准编号：ISO 8133:2006
中文名称：液压传动.单杆液压缸,16MPa小型.附件装配尺寸
英文名称：Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Mounting dimensions for accessories
发布日期：2006-02
标准范围
This International Standard specifies the mounting dimensions required for interchangeability of accessoriesfor 16 MPa [160 bar 1)] compact cylinders conforming to ISO 6020-2. The accessories have been designedspecifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit theirapplication.This International Standard covers the following accessories, identified in accordance with ISO 6099:- AP6: rod eye spherical, female thread (see Figure 1 and Table 1)- AB5: clevis bracket, spherical eye, in angle (see Figure 2 and Table 2)- AA7: pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3)- AL7: locking plate for pivot pin (see Figure 4 and Table 4)- AP2: rod clevis, female thread (see Figure 5 and Table 5)- AP4: rod eye plain, female thread (see Figure 6 and Table 6)- AB2: eye bracket (see Figure 7 and Table 7)- AB4: clevis bracket, straight (see Figure 8 and Table 8)- AA4: pivot pin, plain (cotter pin or snap ring type) (see Figure 9 and Table 9)- AT4: trunnion bracket (see Figure 10 and Table 10)These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The designof these accessories is based on the maximum forces resulting from the specified internal diameters of thecylinders and pressures according to ISO 3320 and ISO 3322.This International Standard only applies to the dimensional criteria of products manufactured in conformitywith this International Standard; it does not apply to their functional characteristics.
立即下载标准文件